TC55H CNC Offline Controller

TC55H 1-4 AXIS Topcnc Offline CNC Controller

TC55H CNC controller is a device used to control the movement of a CNC machine. The TC55H is an upgrading version of the TC55 controller, which means it has additional features or capabilities compared to the older model. The TC55H can control 4 axes of movement, as well as an analog spindle, which is a type of motor used to rotate the cutting tool in a CNC machine. The controller has 16 input ports and 8 output ports, which can be used to connect various sensors and actuators to the CNC machine. The controller also supports importing G code files from a USB stick, which allows users to easily transfer instructions to the machine. Additionally, the TC55H can save the current coordinates of the machine after a power failure, which can be useful for maintaining the position of the machine when it is turned back on.

Product Introduction

Supports all versions of Mach3 and 3-axis linkage.
Support system: Windows XP, 2000, Vista, 7. (not including Mac OS)
Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, the USB cable unplugs and then plugs in, but also the normal connection.
The maximum step-pulse frequency is 400KHz, which can connect the servo driver and stepper driver.
All IO ports are fully isolated, have strong anti-interference, and have stable performance.

Technical Specifications

Minimum data unit 0.001 mm
Maximum data size ± 99999.999mm
Maximum Speed: 24m/min (pulse is 0.001mm)
Maximum pulse output frequency 400KHz
Axis 1-4 (X, Y, Z, C)
X, Y, Z, and C axis can conduct linear interpolation, and X and Y can do circular interpolation. 
Electric Gear: numerator :1-99999 denominator: 1-99999 
USB: Importing program and boot picture(You can load your logo)
Isolated I/O port
Maximum Program Line:1000
Maximum Program: 99
RAM: 128M
External Manual Operation: motor clockwise and counterclockwise spinning, start, pause, alert, and stop 
G code and M code
One panel MPG(Registered Patent)
3.5-inch color LCD, pixel 320*240 
Analog Spindle Output: one 0-10v analog spindle
Support both servo and stepper motor
Support metric system, round, division, degree, inch, etc
Use a USB to connect the computer as a power supply or 24VDC power 
We are a producer of this controller, so we provide OEM service

Package Includes:
1* controller 
1* pack of screws and nut

TC55H topcnc CNC controller Manual Pdf