Home Switch settings in Mach 3

Novusun cnc controller
nvum/nvem/nvcm/nvmpg/nvec/SMC4-4-16A16B
Post Reply
Willem
Posts: 3
Joined: Tue Sep 18, 2018 6:47 pm

Home Switch settings in Mach 3

Post by Willem » Thu Sep 27, 2018 2:30 pm

I installed a physical proximity switch as a home switch on each axis of my CNC milling machine.

Which port and pin settings should I use in Mach3?
Are there other settings for setting hard home switches necessary too?

Post Reply