manual https://www.lollette.com/support/pdf/CNC/SMC5-5.pdf

The motion controller uses high performance 32 bit Cpu and high performance FPGA, equipped with seven inch LCD display, man-machine interface window humanization, memory using external USB with built-in 8GTF card, large storage space, can be connected with the U disk, the working voltage of 12-24 volts ultra wide input, touch type keyboard. The system has the characteristics of high reliability, high precision, small noise and easy operation.
 
The controller can have five axis, multi micro segment forward control algorithm can realize five axis linear interpolation and five axis micro multi segment continuous interpolation, and the line continued carving control, power down storage coordinate function. Support the handwheel control interface.
 
Simple and clear parameters are convenient and quick for your operation. The input / output settings are convenient for you to use and extend the peripherals.
Main functions:
 
Parameter setting: the control parameters related to processing and operation can be set up to make the processing effect reach the best state.
 
Manual operation: manual operation, point movement, return program zero, back machine zero, coordinate zero and so on.
 
Program management: the program can be new, deleted, modified, read, save, copy and paste, automatic processing, continuous, pause and other functions.
 
External IO input: a variety of external IO input controls can be defined to facilitate use
 
Free selection of input functions: the limited input port can achieve various user needs
 
Handwheel: hold an external handwheel to control input or host panel advanced function key analog handwheel, handwheel support speed mode or position mode
 
system composition
 
The numerical control system is mainly composed of the following parts:
 
High performance, high speed 32 bit ARM CPU, high sex function FPGA
 
Liquid crystal display (resolution: 800 x 480)
 
Input / output (16 way photoelectric isolation 10MA input, 8 way photoelectric isolation drop tank flow 500MA output)
 
Technical indicators
 
Minimum standard data unit 0.001mm
 
Conventional precision is positive and negative 2PP pole
 
The precision of the continuous line corner is one of the 4 points of the angle of the corner.
 
(can be defined as an arbitrary value to meet high precision requirements)
 
Maximum data size + 99999.999mm
 
Maximum pulse output frequency 500KHz (five axes can be simultaneously 500KHZ)
 
5 axes (X, Y, Z, A, B) controlled by the number of axes
 
5 axis linkage of linkage shaft number and 5 axis multi line multi line segment prospective interpolation control
 
Hand wheel control speed mode or position mode intelligent cutting deceleration point
 
The intelligent software is limited to predict the deceleration point ahead of time, the reverse will be automatically lifted and the control is more humanized
 
Support U disk
 
Built-in memory, which can expand the high storage capacity of 32G
 
G00
X.Y.Z.A.
Fast moving machine
According to the maximum speed of the machine
Fast moving
G01
X.Y.Z.A.F.
Processing operation
The processing speed is limited by the given F value
G02
X.Y.Z.A.F.
Clockwise circular machining
G03
X.Y.Z.A.F.
Counter clockwise circular machining
G04
P
delayed
Influenced by the P value
G17
(X, Y) coordinate system plane
G18
(X, Z) coordinate system plane
G19
(Y, Z) coordinate system plane
G28
XYZA
Back to the mechanical origin
It can be controlled individually and can be combined
P1X*Y*Z*A*
Assign a value to the current coordinate
P2X*Y*Z*A*
The current coordinates add the given value
P3XYZA
Conditional return to mechanical origin
Only after the boot is available, the function is invalid after the machine is returned.
G54
Workpiece coordinates 1
Memory workpiece coordinate origin
The offset value of the mechanical origin
G55
Workpiece coordinates 2
Memory workpiece coordinate origin
The offset value of the mechanical origin
G56
Workpiece coordinates 3
Memory workpiece coordinate origin
The offset value of the mechanical origin
G57
Workpiece coordinates 4
Memory workpiece coordinate origin
The offset value of the mechanical origin
G58
Workpiece coordinates 5
Memory workpiece coordinate origin
The offset value of the mechanical origin
G59
Workpiece coordinates 6
Memory workpiece coordinate origin
The offset value of the mechanical origin
G80
End of drilling instruction
G81
X.Y.Z.R.F
Drilling instruction
General drilling
G82
X.Y.Z.R.P.F
Drilling instruction
Low residence time controllable
G83
 
X.Y.Z.R.I.F
Drilling instruction
Drill hole
G40
Cancel function
G41
Left knives
G42
Right knives
G43
Z cutter
G90
Absolute value size
default
G91
Increment size
 
M00
Pause instruction
Until the start key continues
M03
Spindle positive rotation
The influence of time delay parameters
M04
Spindle reversal
The influence of time delay parameters
M05
Spindle stop
M07
Spray opening
The influence of time delay parameters
M08
Cooling and opening
The influence of time delay parameters
M09
Close M07M08 at the same time
M30
Total program stop
M47
Cyclic instruction
 
Return to the first line runAppearance: (panel 297mm*176mm) (embedded body: 284mm*164mm) (thickness 58mm)
 
TB248J3m2DH8KJjy1XcXXcpdXXa_!!21574078
TB2t3lZm26H8KJjy0FjXXaXepXa_!!21574078
TB2_LmmmYYI8KJjy0FaXXbAiVXa_!!21574078

Write a review

Note: HTML is not translated!
    Bad           Good

5 axis off-line controller Offline CNC controller

  • Brand: LOLLETTE
  • Product Code: SMC5-5-N-N
  • Availability: In Stock
  • $750.00
  • $689.00


Related Products

XHC MK 3 Axis/4 Axis/6 Axis USB Cnc controller

XHC MK 3 Axis/4 Axis/6 Axis USB Cnc controller

XHC-MK3: MACH3 3—axis control card.    XHC-Mk4: MACH3 4-axis control card.    ..

$139.00 $259.00

TC55V 4 axis 3.5 Inch Color LCD CNC controller

TC55V 4 axis 3.5 Inch Color LCD CNC controller

TC55V stepper/servo motor controller It is equipped with 3.5&n..

$115.00 $125.00

DDCSV2.1 CNC Control System USB 500KHz 3/4 Axis

DDCSV2.1 CNC Control System USB 500KHz 3/4 Axis

DDCSV2.1 3/4-Axis CNC Motion Controller 500KHz Stepper Motor Driver manual http://www.nvcn..

$152.00 $245.00

TC55H TOPCNC CNC controller

TC55H TOPCNC CNC controller

TC55H 1-4 AXIS CNC Controller 1. Product Introduction TC55H is an upg..

$138.00 $170.00

XHC MK4-M4 USB Cnc controller Mach4 CNC Motion Control Card Breakout Board 2000KHz 4axis

XHC MK4-M4 USB Cnc controller Mach4 CNC Motion Control Card Breakout Board 2000KHz 4axis

Mach4 is our newest version of CNC motion control software.Running up to 6 axis machinesOperating:&n..

$195.00 $259.00

DDCSV2.1 CNC Control+4-Axis MPG Pendant Handwheel

DDCSV2.1 CNC Control+4-Axis MPG Pendant Handwheel

CNC 4-Axis Motion Controller 500KHz Stepper Motor Driver DDCSV1.1 + 4-Axis MPG Pendant Handwheel &am..

$230.00 $245.00

DDCSV2.1 CNC Control+4-Axis MPG Pendant Handwheel

DDCSV2.1 CNC Control+4-Axis MPG Pendant Handwheel

CNC 4-Axis Motion Controller 500KHz Stepper Motor Driver DDCSV1.1 + 4-Axis MPG Pendant Handwheel &am..

$215.00 $245.00

XHC CNC Mach3 USB 3 Axis Motion Control Card Breakout Board 2MHz MK3-V

XHC CNC Mach3 USB 3 Axis Motion Control Card Breakout Board 2MHz MK3-V

MKX-IV manualMKX-V  manual Applicable systemMach3Mach3Support axis number3/4/63/4/6Interfa..

$135.00 $259.00

XHC CNC Mach3 USB 6 Axis Motion Control Card Breakout Board 2MHz MK6-V

XHC CNC Mach3 USB 6 Axis Motion Control Card Breakout Board 2MHz MK6-V

MKX-IV manualMKX-V  manual Applicable systemMach3Mach3Support axis number3/4/63/4/6Interfa..

$351.00 $359.00

Tags: SMC4-4-16A16B